fbpx
Previous slide
Next slide

Discombobulator — The Rear Tension Disc-Detaining Excalibur

$̶1̶5̶9̶.9̶9̶ U̶S̶D̶
$149.99 USD

Stock Availability: 44 LEFT

FREE SHIPPING

LIFETIME GUARANTEE

GLOBAL DELIVERY

You give up things when you buy the Discombobulator. Things like imprecision, brittleness and shabby craftsmanship.

What makes the Discombobulator the best disc-detaining tool on the lockpicking market?

"The tool is used by 100+ professionals without a single complaint ... yet," says an eminent Opsasec engineer.

350% Tougher Than Hardened Stainless Steel

Crafted from the finest Chromium Vanadium Alloy, the Discombobulator is 350% tougher than hardened stainless steel, boasting an impressive 1800 MPa of mechanical resistance. For context, 301 stainless steel, commonly used in aerospace and automotive industries, offers around 520 MPa. The Discombobulator surpasses this by nearly 3.5 times.

Break it while lockpicking, and we’ll replace it free of charge, including shipping. How often have we honored this promise? Just once. And only because it met its match against a boot, not a lock.

A Tip Forged in 900°C

Our Discombobulator tip undergoes an advanced ‘triple-phase-technique’ developed by MIT metallurgists. Initially superheated to 900°C, the steel transforms into austenite. It is then rapidly cooled using a unique blend of water, oil, and air, creating a hard yet brittle crystalline structure.

Finally, the tip is tempered by reheating to 200°C – 500°C and cooling slowly, reducing brittleness while preserving hardness. This meticulous process ensures the perfect balance of ductility and toughness, giving you superior control and durability.

Thanks to its heat-treatment process, the Discombobulator offers 10 times higher elasticity and 7.5 times more responsiveness than 301 stainless steel, enhancing feedback and control with every subtle movement.

Opens 9/10 Disc-Locks

The Discombobulator is engineered to handle a wide range of disc-detainer locks, from antique models to the latest high-security systems. It successfully engages with 90% of all disc-locks, easily defeating 99% of low-end disc-detainer locks, and opens 9 out of 10 bike locks with ease.

3 Times Lighter Than Stainless Steel

The ergonomic handle, made from aerospace-grade aluminum, transmits feedback 3 times better than stainless steel. Perfected over two years through rigorous expert testing and community feedback, our handle technology transforms exhaustive picking into effortless action, preventing hand fatigue.

Designed for All Skill Levels

Intimidated by high-tech tools? Don’t be. Whether you’re a beginner or a seasoned pro, the Discombobulator is designed for ease of use and durability. Crafted from a superior alloy using advanced manufacturing processes, it stands out as one of the most durable tools on the market—practically unbreakable and perfect for novices.

Unlike other tools cluttered with screws, tension bars, and complicated features, the Discombobulator is simple, elegant, and effective, ensuring a smooth and efficient lockpicking experience.

Fits Right into your Pocket!

Measuring just 4 inches tall and half an inch wide, the Discombobulator fits perfectly in your pocket, making it ideal for fieldwork. Its sleek design not only performs but also impresses, turning heads as you effortlessly handle the toughest locks.

COMPATIBLE BRANDS

90% of all Disc-Locks

Based on the feedback from over 100+ Lockpickers.

99% Low End Disc-Detainer Locks

Low-End in our eyes means easy-to-get—cheap locks acquired in most shops.

9/10 Bike Locks

Almost all bike Locks.

Abus

Abus Granite, Abus X-Plus, Abus+ & Abus 88/50.

Master Lock

All disc-based products in the Master Lock range.

Kryptonite

Compatible with of all Kryptonite-brand Disc-locks.

Abloy

Precisely: Abloy Disc-Lock.

IFAM

All IFAM disc-based cylinders and padlocks.

Kensington

Opens Standard Kensington Disc-Detainer Locks.

Asaklitt

ALL ASAKLITT DISC-DETAINER LOCKS.

Gerda

ALL GERDNA DISC-BASED LOCKS. 

Anchor Lås

With some Small Modifications…
…It can open them all.

If after endless hours of trial & error you find yourself unable to open a lock listed on the chart … 

We will personally see to it, thereby providing any guidance necessary for you to succeed… 

…And in worst case scenarioProvide A Full Refund.

WHAT PEOPLE HAVE TO SAY

DISCOMBOBULATOR IN ACTION

SOME OF OUR PAST PROJECTS FROM THE OFFSHORE OIL & GAS INDUSTRY

OIL & GAS

Manifold Board - Tubing Hanger

Precipice Angular Measurements can be difficult on complex shapes. Through the high technology measuring equipment we were able to map the position within 0.02 Degrees.

OIL & GAS

Inspection & Measurements - Tubing Hanger

This Project revolved around performing 3D-Scanning on a complicated shape requiring precise measurements using ‘ZEISS’ T-Scan Hawk 2 – Triangulation Scanning Tool.

OIL & GAS

Inspection & Measurements - Tubing Hanger

The Team Part measured ways over 2.5 Tons, at 5 Meters long. And gathered measurements for the entire tool within 0.05 mm. accuracy.

CLIENT WINS

"

Opsasec has been a great help with our product
development.

From our initial ideas and design to manufacturing and marketing.

A true one stop shop!

We have been able to make our ideas into a reality and are now distributing our locksmith tools throughout Europe. 

"Now Distributing Our Tools Throughout Europe!"

Whether you need project management or product design, Opsasec will guide you through the
different processes.

We are very happy with the service we have received and 
have recently decided to move all our manufacturing to Opsasec.
Mark Grainger, QML
Director, ALS Lock Tools Ltd.

"

We are very pleased with the Centering Bolt Opsasec produced for us.

The delivery time was surprisingly quick, and it came with a very nice finish.

"I am confident that you provide customers I refer to you with a professional good feedback on their needs."

Sometimes the path is short when it comes to questions about Plastic 3D printing, which we have a department that can do.

There, I see that plastic materials become too weak, and there is a need for stronger materials.

Then, Opsasec is my first choice when I recommend an alternative supplier where there is a need for milling and turning.

You made us confident that your level of knowledge is top-notch, and then I am confident that you provide customers I refer to you with a professional good feedback on their needs.
Tonny Berge
Technical sales manager, SAFETYTOOLS.

COMPANIES WE'VE WORKED WITH AND/OR DEVELOPED PRODUCTS FOR